Design · Integration · Control · Support

Services

Beyond individual units, OXYGRO designs complete deep water culture greenhouses, connects disinfection and fertigation into one loop, and supports the system once it runs.

Inside an arched greenhouse frame: galvanised steel hoops and lattice purlins under white film, looking towards the end door

01 · DWC Greenhouse Design

A Complete Design for a 10 × 39 m Greenhouse

Layout, tank construction, water systems and a step-by-step installation method for two 36 m deep water culture tanks.

  • Two 4 × 36 m tanks, a 2 m harvest walkway and 1.5 m equipment zones.
  • 75 mm PU/PIR sandwich-panel tanks: chillers run 60% less than with concrete, and installation labour is 70% lower.
  • Aeration, circulation, disc filtration, UV-C, chilling and automated dosing sized for 86,400 L.

Tank Installation Method

Five Steps from Bare Floor to a 36 m Tank

  1. Level the Floor

    Laser-level the greenhouse floor.

  2. Anchor the Track

    Bolt the 77 mm galvanised floor U-track into concrete or compacted earth with ground anchors every 1 m.

  3. Seal and Set the Panels

    Run a bead of polyurethane sealant in the track and drop the 75 mm PU panels in, locking the base of the wall.

  4. Stake Against Bowing

    Every 2 m, drive a 40 × 40 mm galvanised stake 600 mm into the ground, flush with the panel, and screw it through.

  5. Cap the Wall

    Slide the top U-channel over the panels to lock the whole 36 m run together.

ASEPTICER drain-water reuse loop Drain-water reuse loop. Drain water collects in the undisinfected-water tank and is pumped through the ASEPTICER UV disinfection machine into the disinfected-water tank. Disinfected water and water from a clean-water tank meet at a linked valve pair and feed the OXYGRO-Inline, which supplies the irrigation solenoid valves. Drain water returns to the undisinfected-water tank. Undisinfected- water tank ASEPTICERUV disinfection Disinfected- water tank Clean-water tank Linked valve pair OXYGRO-Inlinefertigation Irrigation solenoid valves Drain water returns to the undisinfected-water tank Drain water from the crops
Drain water is disinfected by the ASEPTICER, blended with clean water and dosed again by OXYGRO-Inline.

02 · System Integration

Disinfection and Fertigation in One Loop

The ASEPTICER and OXYGRO-Inline are designed to connect, so drain water goes back to the crop instead of to waste.

  • The ASEPTICER treats 5–40 m³/h of drain water with 1000 W UV lamps.
  • A double butterfly valve blends disinfected and clean water before dosing.
  • OXYGRO-Inline Professional offers drain recycling and reuse as an option.

03 · Remote Control and Monitoring

Run Irrigation from the Screen in Your Pocket

Every fertigation unit and the ASEPTICER have a local touch screen and connect to OXYGRO's HortiECO or HortiMagi control software.

HortiECO and HortiMagi

Control runs from the touch screen, a smartphone or a laptop. Laptop control comes with the Professional editions.

Programmes and Recipes

Control ranges from 6 time-based programmes to 20 time- or sensor-based programmes, with unlimited time-based programmes on JET Bypass-III Professional.

Crop Data and Reports

Plant Scale software shows curves and dashboards on computer, mobile and tablet, and produces custom crop reports.

04 · Support

Help When the Crop Needs It

24/7 Technical Support

Technical support is available around the clock.

Agronomists and Engineers

Agronomists and engineers work together on every system.

Trusted Partners

A global network of trusted partners handles supply and service.

Tell Us Your Crop, Area and Flow Rate

Send the details of your site and we will come back with the equipment that fits, with specifications and a quotation.

WhatsApp